STOPMODE Parameter (S300-S700)
ASCII - Command | STOPMODE | |||
Syntax Transmit | STOPMODE [Data] | |||
Syntax Receive | STOPMODE <Data> | Available in | ||
Type | Variable rw | MMI | No | |
ASCII Format | Integer8 | CANBus Object Number | 35FF (hex) | |
DIM | - | PROFIBUS PNU | 1855 (dec) IND = 1 (dec) | |
Range | 0, 1 | DPR | 255 (dec) | |
Default | 1 | |||
Opmode | All | Data Type Bus/DPR | Integer8 | |
Drive State | Disabled + Reset (Coldstart) | Weighting | ||
Start Firmware | 1.0 | |||
Configuration | Yes | Last Change of this Object | 1.0 | |
Function Group | drive configuration | EEPROM | Yes | |
Short Description | Brake Response for Disable |
Description
STOPMODE defines the response of the drive to a disabling of the output stage. The following settings are possible: The output stage will also be disabled if the VEL0 velocity is not reached within 5 seconds (a 5-second time-out). |