Old Firmware Versions S700
Hello,
I have some old Danaher/Kollmorgen servo amplifiers, S701-724 series, hardware versions 1.21 and 2.00.
I can only download the latest firmware, but it won't work ok on my hardware versions.
Where can I find some old firmware versions like Firmware Historie S300/700 2.35 to 3.12 and Firmware Historie S300/700 3.13 to 4.xx.
Thanks.
Comments & Answers
kenny.hampton@… said ...
The versions of firmware currently on the Kollmorgen website will not work with your S700 drives due to them having older version of hardware.
This is a link to S700 drive hardware and firmware compatible description:
https://kdn.kollmorgen.com/content/s700-hardware-revision-number
Kollmorgen has updating the S700 drive products firmware in order to comply with the recently revised US & EU export regulations (EU Dual Use Regulation 428/2009 & U.S. Dual-use regulation EAR Category 3 under ECCN3A225). This revision will reduce the open loop frequency limit to 599 Hz, without this change our products would become dual use goods in both the US and EU and may require Kollmorgen and/or you to obtain export licenses when exporting these products. Due to the versions of firmware required for your S700 drives, you are required to use the link below to put in a request for the older firmware that does not meet US government compliance velocity restrictions.
http://kdn.kollmorgen.com/content/export-compliance-form
This is a link that explains the Dual Use firmware and hardware regulations in detail.
http://kdn.kollmorgen.com/content/dual-use-changes